Fingerprint Reader (Option); Fingerprint Reader (Optional); Fingerprint Module Configuration - ONE K56-5M Manual Del Usuario

Fingerprint Reader
Install the driver and enroll your fingerprints as instructed
below before use. The fingerprint reader module uses the
Sign-in options configuration of the Windows Account.
Fingerprint Reader Driver Installation
1. Click Option Drivers (button).
2. Click 2.Install Fingerprint Driver > Yes.
3. Click Next > Install > Finish.
34
(Option)

Fingerprint Module Configuration

1.
2.
3.
4.
5.
6.
7.
8.
9.
10. You can now scan your fingerprint to log-on to the computer.
Click the Settings item in the Start Menu.
Click Accounts and then click Sign-in options.
You will need to add a Windows password (click Add under
Password).
After you have added the password you will need to also add a
PIN.
Under Windows Hello click Set up under Fingerprint.
The wizard will then guide you through the set up process to
scan your fingerprints.
You will be instructed to swipe the same finger across the
reader a number of times.
Click Close when complete.
You can choose to Add another finger (this is recommended)
or Remove the current fingerprint reading.
Figure 26 - Accounts - Sign-in options