Operation Via The Menu; Colour Spotlight; Automatic Programs; Music Control - Leuchtkraft RGBL-412DMX Manual De Instrucciones

➃
DMX IN

6.1 Operation via the menu

1) Press the button MENU/ ESC repeatedly until the
indication on the display does not change any
more . Thus, the highest menu level is reached
☞
( fig . 1 on the very left) .
2) Select the desired menu item with the button
UP or DOWN .
3) Press the button ENTER . The display now shows
the present adjustment of the selected menu
item .
4) Change the adjustment with the button UP or
DOWN .
5) When submenu items are available, they can
be activated with the button ENTER and their
adjustments can be changed with the button
UP or DOWN .
6) To save an adjustment, press the button ENTER .
7) For further adjustments start with step 1 .
When no button is pressed,the display is extin-
guished after a few seconds . It will light up again
the next time a button is pressed .

6.2 Colour spotlight

For constant radiation of one colour by the light
effect panel, nine preset colours and a colour
adjustable individually are available:
1) Press the button MENU / ESC repeatedly until
the indication on the display does not change
any more .
2) Press the button UP or DOWN repeatedly until
the display shows
3) Press the button ENTER . The colour most re-
cently selected is activated:
...
= individual colour adjustment
Select the desired colour with the button UP
or DOWN .
12
2
1
3
DMX OUT MENU/ESC DOWN
.
= preset colour
MIC
UP ENTER
4) To adjust an individual colour, select the menu
item
play shows the colour most recently adjusted:
5) Select the colour with the button DOWN or
UP and press the button ENTER . The display
now shows the letter for the colour ( , ,
or ) and the corresponding brightness value
(000 ... 255) .
6) Adjust the desired brightness with the button
UP or DOWN .
7) Use the button MENU / EXIT to exit the menu
item . Now the next colour can be selected and
adjusted .

6.3 Automatic programs

Three different programs can be selected via the
menu item
= colour change 1 (slow)
= colour change 2 (fast)
= different running light effects
The speed can be changed in nine steps (
) .

6.4 Music control

In case of music control, the LEDs light up by the
sound picked up via the microphone (MIC) . Three
programs (
1) Activate the desired program via the menu item
.
2) Adjust the control SENSITIVITY for the micro-
phone sensitivity so that the LEDs are controlled
by the music in an optimum way . The further
the control is turned up, the more sensitive the
response of the music control .
Note: When changing the volume at the music system,
the sensitivity of the microphone must be changed
accordingly with the rotary control .
MIN MAX
SENSITIVITY
and press the button ENTER . The dis-
= red
= green
= blue
= white
:
, ,
230 V~ / 50 Hz
...
) can be selected: