Replacing The Battery - Doro MemoryPlus 309dp Manual De Instrucciones

Replacing the battery
1. Remove the screw and open the battery cover.
2. Remove the old battery and insert a new 3V lithium
battery of the
should be facing upwards (towards the battery cover).
3. Replace the battery cover and the screw.
WARNING!
Only use 3V lithium batteries of CR2032 type.
There is a risk of explosion if other batteries are used.
Used batteries should be recycled.
Troubleshooting
Disconnect the device from the telecom network and then
connect a functioning telephone to the socket in question
and check that there is a dialling tone.
Check that the cords for the product are undamaged and
correctly connected.
If you are still experiencing difficulties, contact the place of
purchase.
English
type. The battery's positive terminal
CR2032
19