Freedom EPN-51070 Guia De Inicio Rapido página 3

Attach Mid Rail to Posts:
1
a. Insert the ends of the mid rail into the holes of each
post making sure holes in rail align with holes in post
(Fig. 1).
NOTE:
The screw holes on the upper post are oriented
closer to the top of the rail hole, while the screw holes
on the lower post are oriented closer to the bottom of
the rail hole.
b. Drive #8 x ¾" self-tapping screws into post holes
and through rail holes (one on each side). Do not
tighten completely (Fig. 2). Do for both top and
bottom posts.
Attach Top Rail to Posts:
2
a. Insert the ends of the top rail on top of each post
making sure holes in rail align with holes in post (Fig. 3).
b. Drive #8 x ¾" self-tapping screws into post holes
and through rail holes (one on each side). Do not
tighten completely (Fig. 4). Do for both top and
bottom posts.
Post Hole
Post
Screw
Mid Rail
Hole
Post
Top Rail
Screw
Hole
Top Rail
Fig. 1
Fig. 2
Mid Rail
Fig. 3
Post
Fig. 4
Post
3