Jøtul F 270 Instrucciones Para Instalación página 7

4. Add the lower bracket and fix using the same screws. Note
that the curved edge must be facing the glass.
5. To prevent the glass from rubbing against the metal, add
small pieces of gasket around the glass (see fig. 7).
6. Place the glass right into the groove and hold it right up
against the door.
7. Add the top bracket and fix it using the same screws (see
Fig. 9D).
5.0 Glass top plate
The glass top plate is supplied in a single pack.
Installation
1. Lift off the air grid and bowl.
2. Place the glass plate on the top plate.
3. Replace the air grid and bowl and rotate the plate so that it
is at the same height as the glass plate.
6.0 Soapstone top plate
The soapstone top plate is supplied in a single pack.
Installation
1. Lift off the air grid and bowl.
2. Place the soapstone plate on the top plate.
3. Replace the air grid and bowl in the groove in the soapstone
plate.
ENGLISH
7