Before Assembly - Palram Feria Instrucciones De Montaje

EN
Please read these instructions carefully before you start to
assemble this product.
Please carry out the steps in the order set out in these instructions.
Keep these instructions in a safe place for future reference.
When encountering the information icon, please refer to the relevant
assembly step for additional comments and assistance.
This icon indicates that the installer should be inside the product.
You will need
To assemble this product (these items not supplied)
Safety
Some parts may have sharp edges. Please be careful when handling
components.
Always wear gloves, eye protection, and long sleeves when assembling or
performing any maintenance on your product.
Do not attempt to assemble the product in windy or wet conditions.
To prevent injuries, do not allow children to play under the product during
assembly.
Do not climb or stand on the roof.
Some versions of this product are painted.
If color was scratched during assembly it can be fixed with the following
tints: White – RAL 9016, Gray – RAL 7012

Before Assembly

This product is suitable for Palram's Patio Covers range
Please consult your local authorities if any permits are required to construct the
product.
It is highly recommended to be assisted by a second person in some steps.
Sort the parts and check according to the contents parts list.
This product is suitable for Palram's Patio Covers range
This product must be assembled on a solid base (such as concrete or asphalt)and
anchored to the ground.
Choose your site carefully before beginning assembly. Make sure that the
mounting surface is leveled and clean from sharp objects in order to prevent
scratches or damages to the product.
Prior to the Extention installation, several parts from the Patio cover needs to be
dismantle, it is recommend to keep them in a safe place for future need.