Descargar Imprimir esta página

During Assembly - Palram Feria Instrucciones De Montaje

Ocultar thumbs Ver también para Feria:

Publicidad

EN
Product dimensions can be adjusted to your specific needs.
The wall-mounting profile (top-back) can be adjusted from 285 to 305 cm (112.2" to 120") above ground.
The adjusting is done when measuring and drilling (step 12).
Poles distance from the wall can be adjusted from 310 to 370 cm (122" to 145.6").
The adjusting is done after assembly and before anchoring (step 33) by sliding poles and profile
7040 +7041 at channels of roof profiles.
Poles distance from the side edges can be adjusted from 0 to 54 cm (0" to 21.3").
The adjusting is done after assembly and before anchoring (step 33) by sliding poles and connectors 937
at channel of profile 7040 +7041.
Note: Wall mounting and distance from the wall determine the roof angle and the total depth of the product
(distance of gutter from the wall). Higher wall mounting and shorter distance between wall and poles increase
the roof angle and shorten the total depth.

During Assembly

Steps/pages marked with dashed outline are referring to the extension kit assembly.(steps 4, 7,10,18 ,30 ,34)
These steps are referring to the installation of the extension kit on the right side of the patio cover;
installation on the left side is possible according to same steps.
During assembly use a soft platform below the parts to avoid scratches and damages.
In case that you already own Palram Patio cover it is necessary to
dismantle some parts and keep them for future use.
Step 4: Install plates #937 with part #7507 as described in step 3
Step 10: Install as described in steps 8-9
Step 18: Install as described in steps 12-17
Step 26: Make sure that the angle between the back wall profile and the panel supporting profiles
is 90 degrees. Assembly of the panels should start from the middle of the patio cover to
each side alternately.
Step 34: Please make sure that distance from the poles and the kit connection to
original patio cover not exceeds 60 cm.
Tighten all screws when completing assembly.
310-370cm
120" - 145.6"
0 - 54cm
0 - 54cm
0" - 21.3"
0" - 21.3"
13
º
17
285-305cm
112.2" - 120"
º

Publicidad

loading