Telstar TCV45510MD Manual De Instrucciones página 22

HORIZONTAL FREZZER
TCV45510MD
Explanatory notes
1. Cross screwdriver 2. Screw hole 3. Handle screw
3) Installation procedures:
a. Take out 1,use a cross screwdriver to drive 1 into the screw hole 3 on the door body and tighten it.
b. Align the screw hole on the handle with the tightened 1 to fix the handle.
c. Tighten 3 on the handle side;
2.3 LEVELING FEET
1) Precautions before operation:
Before operation of accessories, it shall be ensured that the refrigerator is disconnected from power.
Before adjusting the leveling feet, precautions shall be taken to prevent any personal injury.
2) Schematic diagram of the leveling feet
The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor
3) Adjusting procedures:
a. Turn the feet clockwise to raise the refrigerator;
b. Turn the feet counterclockwise to lower the refrigerator;
c. Adjust the right and left feet based on the procedures above to a horizontal level.
22