Valueline VLS-DVBT-FTA1 Manual De Usuario página 6

"Programme Guide"
"EPG" stands for "Electronic Programme Guide". The electronic
programme guide is an on-screen TV and radio guide that shows
scheduled programmes seven days in advance for every tuned
channel.
"Sort"
Sort the channels:
• "LCN": Ascending order.
• "Name": Alphabetical order.
• "Service ID": According to the station.
"LCN"
"LCN" stands for "Logical Channel Number".
• "LCN": Select "On" or "Off".
"Picture"
1. Press the EPG button.
2. Select the programme.
3. Press the blue button to
move a page up.
4. Press the yellow button to
move a page down.
Adjust the photo settings:
1. Select the menu item.
2. Adjust the setting.
3. Press the OK button.
4. Press the exit button to exit
the menu.
"Aspect Ratio": proportional
relationship between the width and
the height of an image.
Options:
• "4:3 Pan&Scan"
• "4:3 Letter Box"
• "4:3 Full"
• "16:9 Widescreen"
• "16:9 Pillar Box"
• "16:9 Pan&Scan"
• "Auto"
"Resolution": number of distinct
pixels in each dimension that can be
displayed on the screen.
Options:
• NTSC: "480i" / "480p".
• PAL: "576i" / "576p".
• NTSC/PAL: "720p" / "1080i" / "1080p"
"TV Format": TV encoding system.
• "NTSC"
• "PAL"
6 6
"Channel Search"
"Time"
"Option"
English
Adjust the settings to search a
channel:
1. Select the menu item.
2. Press the OK button.
3. Press the exit button to exit
the menu.
"Auto Search": Search and install all
channels automatically. The option
overwrites all present channels.
• Press the OK button to start
searching.
• Press the exit button to cancel.
"Manual Search": Search and install all
channels manually. The option adds
new channels without changing the
current channel list.
• Press the OK button to start
searching. If a channel is found, it
will be added to the channel list.
"Country": Select a country.
"Antenna Power": Select "On" or "Off".
Adjust the time settings:
1. Select the menu item.
2. Adjust the setting.
3. Press the OK button.
4. Press the exit button to exit
the menu.
"Time Offset": Select "Auto" or
"Manual" to adjust the GMT offset.
"Country Region": If "Time Offset" is
set to "Auto", select a region.
"Time Zone": If "Time Offset" is set to
"Manual", select a time zone offset.
"Auto Standby": Select "On" or "Off".
Note: If the setting is set to "On", the
device will go to sleep mode after
3 hours. Press the on/standby button
to exit the sleep mode.
Adjust the option settings:
1. Select the menu item.
2. Adjust the setting.
3. Press the OK button.
4. Press the exit button to exit
the menu.
"OSD Language": Select the OSD
language.
"Subtitle Language": Select the
subtitle language.
"Audio Language": Select the audio
language.
"Digital Audio": Select the digital
audio output mode.