Maddalena ElecTo BULK Instrucciones Para La Instalación, El Uso Y El Mantenimiento página 34

– Tighten the bolts.
WARNING!
l
Check the seal hold to prevent leakage.
The antenna cable (1) is fitted with a slot for fastening screws.
Fasten the cable to a support (2) (not provided) in a vertical position as high as possible to
maximize radio-signal capacity.
If the meter is installed underground, take the antenna out of the underground space or as
close to the exit as possible (only for ElecTo BULK radio version).
WARNING!
l
With metallic closures on manholes, keep the antenna at least 30 cm away from
the metal part.
34
2
1
EN