Master Trimmers MT Standard 50 Manual De Uso Y Mantenimiento página 23

Start-Up
Assembling the MT Standard 50 / 75
The MT Standard 50 and 75 machines are delivered fully protected
1
and boxed. Open the box and check the parts received. Place the
parts on a flat surface with room to manoeuvre.
Place the body of the machine (A) as shown in the image, on
3
a flat surface with a height to facilitate assembly. Secure the
feet with the bolts (D) and with the help of the Allen key No. 4
(K). Proceed in the same way with the remaining feet.
Assembling the bag
Identify the collection bag (E) and the ring (F) that is supplied
1
closed with the connector (G) already assembled. Separate one
end of the ring from one end of the connector and insert the free
end through the slit of the bag (E) until it makes a complete turn as
shown in the following image.
Fit the rubber stoppers (C) on the base of the feet (B).
2
Position the machine supported on its four legs. IMPORTANT:
4
The MT Professional 75 model must be handled by two
people due to its weight.
Rejoin the end of the ring with the connector and hide the
2
connector inside the slit of the bag.
G
F
www.masterproducts.es
23