Hardware Installation; English - AirLive HP1000E Manual Del Usuario

Important Information
Do NOT use a switch to connect multiple powerline devices to your
PC's Ehternet Port. Each powerline device should be connected to its
Own Ethernet Port on the PC
Because the Birdge sends data over the power lines of your
house,plug the Bridge directly into a electrical outlet. Do not plug the
device into a UPS or power strip with surge protection.
The bridge has its own power filter for protection against surges

Hardware Installation

1. Plug the included Category 5 Ethernet network cable into the
computer's Ethernet port
2. Plug the other end of the cable into the Ethernet port of the Bridge
3. Plug the Bridge into an electrical outlet
Powerline Ethernet Adapter
HP-1000E v2

English

1
1