Technical Data - REV Ritter HFGT120ABW Indicación Para El Montaje Y El Servicio

GB
HALOGEN FLOOdLIGHT IP44
with movement sensor
Operation and maintenance manual
dear valued customer,
Thank you for purchasing our halogen floodlight.
Before operating the halogen floodlight, please read the following instructions
for use carefully and keep them in a safe place for future reference.
PROPER USE
The halogen floodlight is splash-proof, conforms with IP44, and is
suitable for occasional use in exterior areas.
The halogen floodlight conforms with the applicable European CE
guidelines.
GENERAL SAFETy INSTRUcTIONS
The halogen floodlight:
• must always be placed at least 1m away from the surface
being illuminated – in particular, the power cable must not
be illuminated or come into contact with the metal housing –
maintain the specified minimum clearances (s. 1-4).
• must always be given sufficient time to cool down – the
floodlight housing can get extremely hot – the power supply
to the floodlight must always be disconnected and locked out
before servicing, e.g. for bulb replacement or cleaning.
• must only be used on flat, stable surfaces.
• use only with a sufficiently protected 230V~ installation.
• must not be used in rooms that represent an explosion hazard
(e.g. cabinetmaker's workshop, painting operation, or similar).
• must not be used in the immediate vicinity of flammable
materials.
• must not be set up in the immediate vicinity of pools, fountains,
ponds, or similar bodies of water.must not be immersed in
water or other liquids.
• must not be immersed in water or other liquids.
• must not be operated with wet hands; never look directly into
the light source.
8
• must never be covered.
• must never be operated with an open housing, missing or
damaged wiring compartment, or missing or damaged lens.
• must never be sprayed or cleaned using a steam pressure
cleaner since this can damage the insulation and seals.
• must never be repaired by the user. Repairs must only be
carried out by the manufacturer or an authorized service
representative.
MOTION dETEcTOR – GENERAL INFORMATION
• The motion detector uses passive infrared technology.
• Highly sensitive infrared detectors react to minute temperature changes in
the coverage area, e.g. those caused by a human being.
• Trees and shrubs can trigger false readings – the ideal installation height is
2.5m.
• The range and sensitivity depends on the ambient temperature; for
example, the range can increase in cool weather.
• While the motion detector is protected against the weather, an additional
enclosure is recommended.

TEcHNIcAL dATA

• Output:
• Voltage:
• Acquisition angle:
• adjustable vertically and horizontally
• Range max:
• Response time:
• Protection class:
• Replacement illuminant:
R7S
ILLUMINANT INSTALLATION
• Loosen the screw on the top of the floodlight and swing the lens forward.
• Remove the illuminant from the packaging.
• Avoid touching it with bare hands since this causes grease stains which
lead to overheating. Use a clean, dry, lint-free cloth.
• Insert one end of the illuminant into the socket, press against it, and insert
the other end of the illuminant into the socket. Ensure that the socket is not
damaged.
HFGT120ABW max.150W
HFGT230ABW max. 230W
230V~, 50Hz
110°
12m
5sec.–12min
IP44
120W - Art.-Nr. 0599940555
230W - Art.-Nr. 0599945555
9
GB