Aux In Function - Denver IFI-710 Manual De Instrucciones

OPERATING INSTRUCTIONS
(2) If the iPod player is connected, the unit will start playback. The iPod battery
will be charged automatically until it is fully charged.
Select your desired music, photo, or videos, etc., and play the connected iPod
as usual.
(3) Press PLAY/PAUSE button on top panel or remote control to control play and
pause functions. Press it again to resume the playback.
(4) Press Previous/Next button on the remote control to select the previous or
next song.
(5) Press the VOLUME + / VOLUME – button on the top panel or remote control to
adjust the volume as desired.
(6) Press the BASS+/– or the TREBLE +/– button on the remote control to adjust
the sound effect as desired.
2). Control iPod menu by Remote Control only
Press the "iPod Menu" button on the remote control. The iPod will go to the
previous menu. Press the iPod MENU UP/DOWN button on the remote control to
select iPod menu; then press the iPod ENTER button to enter the selected menu.
Note: The unit cannot show any music information of your iPod. Please view the
music information through you iPod display.
3). Charge your iPod
If the iPod is docked to the unit, it will charge automatically in
STANDBY mode, iPod Mode, and AUX Mode.

3. AUX IN FUNCTION

Connect the Audio Output jacks of your auxiliary sound source (TV, VCR, DVD Player,
MP3 player, Cassette Deck, Mini Disc player, etc.,) to the AUX in socket on the back
panel of the unit. The auxiliary function will only be supported when the AUX in jack
has a suitable sound source connected via an AUX in cable. (The audio cable is not
included.) The auxiliary function will only activate when the aux in cable is connected.
1. Press the STANDBY button on the remote control to power on the unit.
2. Once the AUX in cable is connected with your audio device and your speaker
system, turn your auxiliary source 'On' and operate it as usual.
3. Press the AUX/iPod button on the remote or press and hold the PLAY/PAUSE button
on the unit to select AUX function. The sound from the auxiliary source will be heard
through the speakers of this system.
4. Press the VOLUME+/-, BASS +/- or the TREBLE -/+ to adjust the sound effect level as
desired.
4. Video out function
When an iPod Video is plugged into this unit, videos can be viewed on another display
screen by connecting the VIDEO OUT jack of the main unit to the desired video display (
video connection cable is not included ).
Note: Please make sure the TV Out function is set to ON in the iPod Video Setting
menu. Otherwise, the video signal will not be able to show on the display.(For details,
please check the iPod Video Instruction Manual.)
- 7 -