Avionaut GLIDER BELT FIXED Instrucciones De Uso Y Garantía página 54

K Lever for adjusting the child seat inclination
angle
L Car seat belt tension button
M Car seat belt tensioners
N Car seat belt locks
O Gaps to guide the shoulder part of the car seat
belt
P Hip car seat belt pass-through
R Car seat belt pass-through hole
S ISOFIX system release holders
T ISOFIX system tips
U Seat base
W Shell (body) of the child safety seat
Y Clipboard flap for the manual
Safety, use and travel
• Before purchase, each child safety seat should
be installed in the car to check whether it can
be properly installed and used in a given car.
Matching the child safety seat model to the
car type is one of the most important safety
criteria. The seller's assistance during the first
installation also guarantees that the installation
will be fully correct.
• Remember that parents are always responsible
for the safety of the child while driving.
• Never leave the child in the safety seat
unattended in the car or outside it.
• Never hold your child on your lap while the car is
in motion.
• The safest place for your child while travelling is
the back seat of the car.
• Before each trip, make sure that the seat belts
are not damaged or twisted.
• When the child safety seat is installed, the rear
seat backrest must be locked and cannot move.
• Before each trip, make sure that the Avionaut
Glider child safety seat has not been pinched in
the door or exposed to the movement of luggage
or the seat backrest.
• Make sure all luggage in the car is securely
attached.
• Do not use the Avionaut Glider child safety seat
without upholstery, as it is part of the child safety
system.
• Take short breaks during longer trips. Your child
also needs movement.
• Always cover the child safety seat when you leave
the car parked in a sunny place. The upholstery
54