LOTRONIC POWER8LED-MKII Manual Del Usuario página 6

21. Lights up when the battery is fully charged.
22. Low battery voltage indicator. When the light glows, please charge the unit
23. Multi digital display screen (Note: screen on during working status)
Use of the Wireless microphone
1. Open battery cover and insert batteries with the correct polarity.
2. Turn the microphone power switch to ON, if power indicator doesn't flash or
remains constantly on, batteries may be exhausted or inserted with the wrong
polarity.
3. Adjust M.VOL knob on the speaker for the microphone's volume.
Note:
1. Avoid using the wireless microphone too close to the rear side of the speaker.
Avoid strong light and other obstacles as this might influence the reception.
2. The maximum range of the microphone is 10m.
3. Do not use another wireless microphone with same frequency at the same time at
a short distance, as this will cause crosstalk or interference.
USB/SD card Instruction:
Keep the speaker away from high temperatures, high magnetic fields and sources of
high frequencies. If the speaker doesn't work properly, please switch it off and
restart, or unplug USB/SD card, and plug again, speaker will come back to normal
status.
The unit supports MP3, WAV formats.
1. USB port, plug and play.
2. SD slot, plug and play.
3. Play/pause key, when playing, press this key to pause, press again to play.
4. Last/Next key, when playing, press this two keys can select last or next song.
5. Repeat key, when playing, press this key to single repeat or all repeat the files.
Note:
1. Format USB/SD card to FAT32 in computer.
2. System reads the data according to file's name, if the files have: 01,02, then the
speaker will read 01 firstly.
3. Copy MP3/WMA files to USB/SD card, we suggest to delete the non-relevant files
and folders. The system will read faster and less errors will occur during reading.
Recording instructions:
1. Insert a USB/SD storage device and connect a wireless or wired microphone. Press
the REC button on the remote control and the unit will start recording the sound
from the microphone. Press PLAY button to exit recording, and press PLAY button
©Copyright LOTRONIC 2016 POWER8LED-MKII 6