Descargar Imprimir esta página

LOTRONIC POWER8LED-MKII Manual Del Usuario página 7

Megafonia portatil con vumetro gigante y micro vhf

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
again to playback the recorded file.
2. In Aux / FM mode, insert a USB/SD storage device and press REC on the remote
control to start recording. Press PLAY button to exit recording. Press PLAY button
again to playback the recorded file.
3. If in Bluetooth mode, REC will not work.
FM instruction:
1. Press MODE button to switch to the FM mode. Hold
button to search from
87.5~108MHZ automatically. During search process, if you press
button, the unit
will stop searching.
2. Hold  or  to search manually. Once the stations are stored, press digit keys 
or  to play the radio.
Bluetooth function
1. Go to Bluetooth mode by pressing Panel or remote's MODE key.
2. Search Bluetooth device. Activate mobile's Bluetooth function, mobile go to
"search Bluetooth device" status, searched Bluetooth device will be shown in the list.
3. Pairing confirm connect.
When mobile shows "POWER8LED-MKII", connect to it, after few seconds, devices
pairing successfully, normally it takes few seconds to connect Bluetooth.
4. Bluetooth auto return pairing and connection:
The speaker contains an auto return pairing function. Turn it on and go to Bluetooth
mode, it will search previous Bluetooth device and return pairing, if it can't find
previous device after 5 seconds, it will go to pairing status, the other Bluetooth
device can pair with it.
5. Let mobile go to music mode to play music, also can press panel/remote's
Play/pause key to play/pause music (Last/Next key on the panel or remote also can
control mobile's music player).
Charging instruction:
1. The speaker contains a built-in high capacity 4000MAh lead acid battery. If the
battery voltage runs low, connect the DC15V/2A power adapter to the speaker's rear
side input port (input voltage 110-240V). During the charge, the indicator LED (6) on
the rear side is lighted. It takes around 4-8 hours to fully charge the battery. Once
charged, the indicator (21) lights up. Disconnect the mains adaptor as soon as the
battery is fully charged in order to extend the battery life. Switch off if the unit is not
in use.
2. Please fully charge the speaker if you haven't used it for an extended period of
time.
Important Note:
While using the battery to play, if the sound mutes suddenly, and the "low battery"
indicator light on the rear panel is on, please charge the battery immediately and
©Copyright LOTRONIC 2016
POWER8LED-MKII
7

Publicidad

loading