Replace The Filter Cartridge - Kohler Clarity Pro Instrucciones Y Cuidado

Replace the Filter Cartridge

When the flow rate is reduced, or if there are tears present in the filter, the filter
needs to be replaced.
NOTICE: Filter cartridge life differs based on water quality.
CAUTION: Risk of product damage. Due to the fragile nature of the filter
cartridge, cleaning the filter is not recommended.
1. Remove the existing filter cartridge by unthreading the nut under the upper
container.
CAUTION: Risk of product damage. Do not use tools or overtighten the nut. Do
not turn the filter cartridge.
IMPORTANT! Wash hands with soap before replacing the filter cartridge.
2. Assemble the new filter cartridge to the upper container with the rubber
washer between the cartridge and the container. Handtighten the nut while
holding the filter cartridge with the other hand. Do not overtighten!
3. Add a small amount of water to the upper container to test the seal. If water
passes rapidly into the lower container, tighten the nut further.
Kohler Co. 9 1404675-2-A