JUNO 56RLS-RETROKIT Instrucciones De Instalación página 2

Installation
IMPORTANT: These fixtures must be electrically
grounded. Failure to do so can result in electric
shock or undesired operation. The recessed housing
must contain grounded brackets to support the 6RLS
springs and provide electrical ground to the fixture.
If the recessed housing is grounded but does not
contain spring retaining brackets, contact factory to
order an adapter kit (V6RL-TRB). If the recessed
housing sidewalls and spring retaining brackets
are not grounded, consult factory or a qualified
electrician for additional instructions. Connection
of the strap ground wire is not required when the
recessed housing contains grounded spring
retaining brackets.
Power to the recessed housing must be turned off
prior to installing these fixtures. Failure to do so
can cause electric shock, which can result in injury
or death.
1. Remove strap from fixture. If installing into a 5"
recessed housing, install the 56RLS-RETROKIT
torsion springs onto the strap in the inner position
(see Figure 3). If installing into a 6" recessed
housing, install the torsion springs in the outer
position (see Figure 4).
2. Snap strap with springs back onto fixture
(see Figure 5).
3. Install the female orange pluggable connector onto
the 6RLS lead wires by pushing wires fully into the
connector ports. Ensure the black lead wire is
installed into the port with the black stripe and the
white lead wire is installed into the unmarked
port (see Figure 6).
4. Install the medium base socket adapter into the
recessed housing socket.
5. Plug connector from step 3 into adaptor from
step 4 by pushing together until fully seated.
6. Insert torsion springs from 6RLS fixture into
corresponding retaining brackets in recessed
housing. Carefully push fixture towards ceiling
until springs pull fixture flush to ceiling.
WARRANTY
Juno Lighting Group provides five year limited warranty on LED components from date of purchase. Juno Lighting Group's obligation
is expressly limited to repair or replacement, without charge, at Juno Lighting Group's factory after prior written return authorization has
been granted. This warranty shall not apply to products which have been altered or repaired outside of Juno Lighting Group's factory.
This warranty is in lieu of all other warranties, expressed or implied, and without limiting the generality of the foregoing phrase, excludes
any implied warranty of merchantability. Also, there are no warranties which extend beyond the description of the product on the
company's literature setting forth terms of sale.
Product Services Phone (888) 387-2212
1300 South Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • www.junolightinggroup.com
INSTALLATION INSTRUCTIONS
For 56RLS-RETROKIT Accessory Kit
INNER POSITION
FOR 5" HOUSINGS
Figure 3
OUTER POSITION
FOR 6" HOUSINGS
Figure 4
Figure 5
Figure 6
© 2016 Acuity Brands Lighting, Inc. Rev 4/16 P6101 pg 2 of 2