Configuring Scan To E-Mail; Configuring Fax Setup - Lexmark X4500 Option Guía De Configuración

Configuring
Scan to E-mail
Configuring
Fax Setup
Configure your MFP
1
Type the MFP IP address in your browser URL field (for
example, http://192.168.236.24), and then press Enter.
2
Click Configuration.
3
Click Scan to E-mail General Setup.
4
Type the SMTP gateway of your network or Internet service
provider in the appropriate field. Specify a default e-mail
address for the message reply line.
5
Click Submit.
The Telephone Consumer Protection Act of 1991 requires all
outgoing faxes to contain specific information in a margin at the top or
bottom of each transmitted page, or on the first page of the
transmission.
Use your Web browser to set the required fax information:
1
Type the MFP IP address in your browser URL field (for
example, http://192.168.236.24), and then press Enter.
2
Click Configuration, and then click Fax Setup
— If Analog doesn't appear in the drop-down menu, select it
now. Click Submit.
— If Analog does appear in the drop-down menu, click
Configuration.
3
After the configuration page refreshes, enter the required FCC
information:
— Station Name (a personal name or company name)
— Station Number (the fax phone number)
Set or change any additional fax settings, and then click
Submit.
4
Check the current date and time;
a
Click Configuration.
b
Click Setup and Configuration.
c
Click Date and Time.
:
9