Installation Instructions; Attention - Airon IAT-SYD601A Manual De Usuario

4. INSTALLATION INSTRUCTIONS

Way one:
4.1 The cooker hoods should be placed at a distance of 65-75cm from the cooking surface for best e ect.
4.2 To install onto the wall drill 4 holes of Ø8mm on a suitable place according with the centre distance of
hole in the back of the cooker hood.
4.3 Insert the nut into the holes.
4.4 Insert the screws into the nuts and tight.
4.5 Put up the cooker hood onto the tighten screws.
4.6 Then use the attached accessories with the goods to turn the screws into the two holes of
inside the hood, and then x the screw to tighten the hood onto the wall.
4.7 Put the one way valve onto the cooker hood.
Way two:
4.1 Drill 6 holes of 4mm diameter at the bottom of the hanging cupboard
4.2 Put the one way valve on the cooker hood, then install the cooker hood on the bottom of the
cupboard, tighten the hood with enclosed 6 screws.
4.3 Install the adjusted board on the bottom of the hood in order to keep out the gap between
hood back and cupboard.

5. ATTENTION:

should the lamps not work, make sure they are well tightened
2