Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 2
2
9
25
#9 BOLT M6*25
Step 2:
Fasten the mesh frames (#6) to legs (#2, #3, and #4) by
using bolts (#9 and #10). Keep the bolts loose.
See Figure 2.
FIGURE 4
5
15
#11 BOLT M6*15
Step 4:
Fasten the mesh frames (#6) to the support frame (#5) by
using bolts (#11). Keep the bolts loose. See Figure 4.
FIGURE 6
V-4
10
4
6
6
20
#10 BOLT M6*20
5
6
6
DO NOT RETURN TO THE STORE!
STOP
FIGURE 3
3
Step 3:
Insert the support frame (#5) into the plastic holders attached
on the underside of the table top (#1) rim. Fasten them
together by using screws (#8). See Figure 3.
FIGURE 5
11
Step 5:
Fasten the back frame (#7) to legs (#2 and #3) by using
bolts (#12). See Figure 5.
Step 6:
Turn the table to its upright position. Make sure that all of the
bolts have been tightened completely. See Figure 6.
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water,
rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
• Wash glass with mild soap and water, rinse thoroughly,
and dry completely.
• Inspect and tighten all bolts and fasteners on a regular
basis to ensure the proper performance and safety of your
table.
• When moving the table, lift. Do not drag this table.
• We recommend the use of furniture covers when not in use.
• In order to prolong the life and beauty of your table, we
recommend that it be stored in a dry and protected area
during off season periods.
PAGE 2 OF 3
5
1
2
12
30
#12 BOLT M6*30
5
8
3
7
Publicidad
