Cleyver Xsmart Manual Guide página 15

VIRTUAL KEYS ON SCREEN :
Useful tips :
1. In case the system stops working, press and hold down the power
button until your device vibrates, then release.
2. Do not cover Receiver, Main MIC and Sub MIC.
3. Adjust the volume to a comfortable level to prevent hearing damage.
4. USB Type-C connector is waterproof, please ensure that you connect
charger correctly to prevent damage to port.
5. The SIM/SD tray is not waterproof, please ensure that it is closed
correctly to prevent water damage.
Waterproof warning :
1. The Xsmart is IP68 certified.
2. SIM tray must be completely closed to prevent water damage.
3. If the phone does come in to contact with water, it may affect the audio
quality for a short period. In this case please dry the phone using a clean
cloth and then allow it to stand and dry naturally for 30 minutes.
This should restore the audio quality to the correct standard.
4. Please do not use any other method, (hairdryers for example) other
than that listed above to dry your phone, as this will affect the phones
performance.
5. If your phone has received a strong shock or has been bent or twisted,
ensure that it does not come in to contact with water.
PREPARING TO INSTALL THE SIM/MICRO SD CARD
Installing the SIM and Micro SD card :
1. Use the metal ejector pin provided to open the SIM tray.
2. Pull out the SIM tray.
3. Place the Nano-SIM in inside position.
4. Place the Nano-SIM or Micro SD card in outside position.
5. Make sure that the Nano-SIM and Micro SD card metal contact parts
are facing down and that the cut corner aligned with tray in the correct
position, as per the diagram shown above.
15