Battery And Charging - Cleyver Xsmart Manual Guide

SIM Tips :
1. The Xsmart does not support 2 SIM cards data services at the same
time. When inserting 2 SIM cards, you can only choose one of the 2
SIM cards to use 4G services. The Xsmart supports dual SIM - dual
standby but single pass. This means that you cannot use both SIM
cards for calls or data services simultaneously.
2. The Nano-SIM and Micro SD card socket can only be used for either
Nano-SIM or Micro SD card. Place the Nano-SIM vertically or place
Micro SD card horizontally.
3. Do not insert or remove the tray when your phone is powered on.
4. Make sure the cards are correctly aligned and the tray is level before
inserting it into the phone.
5. SIM card adapter. A cut SIM card or any other non-standard cards
are not allowed. Non-standard cards may not be recognized by the
phone and can damage the tray.
Micro SD Tips :
1. Do not remove the Micro SD card whilst using the phone, as the card
may be damaged. ONEDIRECT will not be held responsible for any
subsequent data loss or card damage resulting from this action.
2. Turn the phone OFF before installing or removing the Micro SD card.
3. Please note that the Xsmart is not supplied with a Micro SD card.

BATTERY AND CHARGING

Note: The Xsmart battery is not removable.
The phone may become hot when using Quick charge.
Standby time :
1.The Xsmart standby time is dependent on different working
environments.
2. A Phone receiving a weak network signal and operating at low
temperature will have a shortened standby time.
3. Screen brightness, system settings, games, music, video, location
services, camera, Bluetooth, Wi-Fi and applications consume the most
battery power.
Charging the phone :
1. Plug the USB Type-C cable into the phone.
2. Make sure to use the original charger and cable as provided.
3. When the notification light turns green, continue to charge for 15
minutes.
4. Charging time is dependent on charger output and phone running
status.
5. The Xsmart supports quick charge, using the original charger and
USB cable provided in box.
6. Using a cable or charger other than the one supplied may damage
the phone.
7. Do not play music whilst the phone is charging.
Tips :
1. Fully charge the battery straight from the box, switching off the
power when battery indicator shows full. Please do not leave the
phone on charge when full as this may damage the battery and affect
performance.
2. Disconnect the charger from mains power supply when not in use.
3. In the event of a fully discharged battery, please charge the phone
for at least 15 minutes before powering it on.
16