MAXSA Innovations 44642-CAM-BK-16-12 Instrucciones De Montaje Y Funcionamiento página 9

Camara y proyector solar de seguridad por video, activada por movimiento
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

VIEWING THE VIDEOS (MAC OS)
You must follow the steps in this section anytime you wish to view the videos on the Micro-SD storage card located in
the camera module. If the camera is already plugged into the computer, skip to step 3. If not, start with step 1. If the
product or Micro-SD card is new and no testing has been done, the card will not have any files.
1. Disconnect the camera module by following the steps in HOW TO DISCONNECT THE CAMERA MODULE on
page 3 of the main instruction booklet included with the product.
2. Plug the camera module into a USB port on your computer.
3. Open the drive for the storage card, labeled NO NAME.
4. Double-click the folder labelled DCIM.
NOTE: IF THE MICRO-SD CARD IS NEW OR IF YOU HAVE NOT TESTED THE COVERAGE AREA (PG. 4 OF THE MAIN
INSTRUCTIONS), THE DCIM FOLDER WILL NOT EXIST YET.
5. The next set of folders you see are named by the date the videos were recorded. The folders holding the
videos for each day will be named with the following format: YYYYMMDD (Year, Month, Day) For example, all
videos recorded on March 23rd, 2016 will be in a folder labeled 20160223. Find the day you want to view and
double-click the folder.
6. Within each folder, you will see all the video files recorded that day. The video files will have the following
format: YYYY_MM_DD_HH_MM_SS (Year, Month, Day, Hour, Minute, Second). The time stamp corresponds
to the time the video started recording. The hours are listed in military time so will appear as 00 through 23.
For example, a video recorded on February 23rd, 2016 at 3:07 and 22 seconds PM will have the filename
2016_02_23_15_07_22.
7. Click on any of the files to view the video that was recorded at that time.
NOTE: THERE IS A ONE (1) SECOND DELAY BETWEEN THE TIME WHEN THE VIDEO CAMERA FLOODLIGHT IS
ACTIVATED AND THE TIME WHEN THE CAMERA ACTUALLY STARTS RECORDING. BECAUSE OF THIS DELAY,
MOVING OBJECTS MAY BE WELL WITHIN THE FIELD OF VIEW OF THE CAMERA WHEN THE VIDEO CAMERA
STARTS RECORDING.
NOTE: AFTER THE MICRO-SD CARD IS FULL, THE CAMERA RECORDS OVER THE EARLIEST RECORDINGS, SO
MAKE SURE YOU SAVE ANY FILES YOU WANT TO YOUR HARD DRIVE.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido