VonHaus 3500102 Manual De Instrucciones página 8

MOUNTING A MITRE SAW TO THE STAND
• Unplug the saw and the saw arm in the downwards
position.
• Place a tool mount underneath the saw, aligning the
mounting holes on the mitre saw base with the slot in the
top of the tool mount.
• Fix the carriage bolt up through both the tool mount and
the mounting hole ion the saw.
• Secure in place using a flat washer. Lock the washer and
nut, repeat through the other end of the tool mount.
7
Components required to complete this assembly step (not supplied)
x8
x8
x8 x8
EN