Stand Installa�On - LC-POWER C-M49-DFHD-144-C-Q Manual De Instrucciones

5. Stand lnstalla�on
1. Open the package, remove the product with the foam s�ll a�ached, and
place it gently on a desk or table.
2. Take out the three main parts of the carrier. Then, a�ach the three screws
to secure the base A and base B, and three screws for securing the base to
the stem.
A base
base B
3. Remove the foam underneath.
4. Place assembled stand into the back cover. Make sure the assembled stand
inserted into back cover.
Screw (8 mm x3)
Eng-4
Stand Stem
Screw (12mm x3)