Stand Installa�On - LC-POWER LC-M27-QHD-165-C-K Manual Del Usuario

5. Stand lnstalla�on
Keep the foam underneath the monitor before a�aching the stand.
Open the packing box, take out the bracket and the base, and use one bolt
1.
(the bolt can be found at the base) to a�ach the base of the stand to the
upright secton, as shown below:
Moun�ng
Plate
2. A�ach the stand onto the rear of the monitor by loca�ng the top of the
upright sec�on into posi�on on the rear of the monitor before clipping
in the bo�om of the moun�ng plate. Ensure the moun�ng plate is fully
located.
3. Once it is inserted press downwards on the neck un�l you hear a click
sound.
4. Use both hands to stand the assembled monitor on a flat desktop.
The stand can be removed from the rear of the monitor by pressing the

quick release bu�on on the rear of the monitor.
Bolts x 1
Eng-6
Quick release bu�on