Environmental Protection; Declaration Of Conformity - Carat A-2510L Instrucciones De Uso

ENVIRONMENTAL PROTECTION

According to the European regulation 2012/19/
EU, CARAT is responsible to recycle old electric
drill motors. You are therefore requested to
return old CARAT electric drill motors to your
local reseller.
WARRENTY
For the machine, a guarantee period of 12 months applies
from the moment of delivery. Guarantee claims must be
shown by submission of purchase invoice. The guarantee
includes the repair of defects which have occurred and can
be linked by to material or manufacturing faults.
Not covered by guarantee:
• Defects or damages which have arisen due to incorrect
use or connection.
• Machine overload.
• When maintenance has been carried out incorrectly or
badly.
• Information in the manual has not been properly follo-
wed.
• The machine is used by unqualifi ed persons.
• If the machine is used for purposes for which it is uns-
uitable.
• The machine is repaired using unoriginal parts.
• If the machine encryption is damaged or deleted.
• If defects are caused by fi re, damp and/or transport.
EMISSION
Typically the A-weighted noise levels of the pro-
duct are: Sound pressure level 94 dB(A); Sound
power level 105 dB(A). Uncertainty K = 3 dB.
Measured values determined according to EN 61029.

DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents:
EN 61029-1; EN 61000; 2006/42/EC; 2014/30/EC;
2002/95/EC
Director: C.J. van Beek
06-01-2017
CARAT Nederland B.V.
Nikkelstraat 18, 4823 AB Breda , The Netherlands
NMHX005
16-01-2017
SYMBOLS
Do not dispose of electric tools toge-
ther with household waste material!
European Conformity Mark
Wear ear protection.
Wear a dust mask.
Wear
gloves.
Always disconnect the plug from the
socket before carrying out any work on
the machine.
Please read the instructions carefully
before starting the machine.
General warning.
ENGLISH – ORIGINAL INSTRUCTIONS
suitable protective working
7