YATO YT-82600 Manual De Instrucciones página 13

GB
drive unit housing with a slightly damp soft cloth or sponge and then thoroughly wipe dry. Vents should be cleaned by means of a
soft brush or using a jet of compressed air at a pressure of not more than 0.3 MPa.
After every 100 hours of operation, the fl exible shaft and vibration poker should be inspected and lubricated at an authorized
service point of the manufacturer.
Spare parts
A detailed list of product's spare parts can be found in the "Download" section, in the product card, on the TOYA SA websites:
www.toya.pl and www.toya24.pl.
Product storage
The product should be stored thoroughly cleaned and dried. The fl exible shaft must be disconnected from the drive unit.
Store the product in closed rooms. Protect it against an access of unauthorized persons.
At the place of storage, ensure proper ventilation to prevent condensation of steam. The place of storage should protect the
product from the eff ects of weather conditions.
Product transportation
During the work, the product should be transported over short distances by supporting simultaneously the drive unit and the
fl exible shaft.
When transporting over longer distances, dismantle the fl exible shaft from the drive unit. Both elements should be transported
separately. Transport the product in unit packaging or other hard packaging that provides protection against shocks. During
transport, protect the product from moisture!
O R I G I N A L I N S T R U C T I O N S
13