Maintenance And Cleaning - PROZIS Helix Manual Del Usuario

MAINTENANCE AND CLEANING

• Switch the product off and remove all plugs before cleaning!
• Do not use aggressive or abrasive cleaning agents or materials such as scouring milk or
steel wool to clean the components. They can damage the upper surface of the appliance!
• Protect the device from water drops and water spray. Use only a clean, dry cloth for clean-
ing the appliance and never use any corrosive liquids. Use a slightly damp cloth and a mild
cleaning agent to remove any stubborn dirt.
• Make sure moisture does not enter the product during cleaning to prevent damage to the
product and related repairs. NEVER submerge it in water. This will damage the electronic
components.
• Regularly inspect and clean any dirt trapped around the rotors using a soft brush. Accumu-
lation of dirt adds additional stress to the motor and may cause the rotors to spin unevenly
or even stop spinning completely.
STORAGE
• When no longer using the device, store the product in a dry environment, protected from
dust and direct sunlight.
• If the device is not going to be used for a long period of time, you should remove the bat-
teries and recharge it on a regular basis. This helps maintain battery performance.
• Store your appliance inside the original case provided.
PRODUCT OVERVIEW: SEE PAGE 2, FIGURE A
Drone
1.Head 2.Back 3.Power switch 4.Rotating blades 5.Protecting frames
Gesture remote controller
6.Main unit 7.Joystick 8.Take off/landing button 9.Glove 10.Battery compartment 11.Battery
compartment cover 12.Cover lock 13.Charging indicator light 14.Power switch
Joystick
15.Up 16.Down 17.Left 18.Right
EN
7