GP CHR41 Manual De Instrucciones página 4

Getting to know your headlamp
( A ) Main button
( B ) Distance sensors (auto dimming)
( C ) Sensor indicator light
(red light)
1. Fitting batteries and checking battery status
1a. Check the headlamp is off before opening battery compartment.
1b. Insert new batteries following the polarity markings (+) and (-) on the battery
compartment.
1c. Power indicator light (D) will indicate battery status after the light is on.
Green LED (Flashes 3 times)
Green LED (Flashes 2 times)
Red LED (Constant on)
2. Charging the headlamp
2a. Ensure the same type of NiMH batteries are installed properly in the headlamp.
2b. Charging indicator light (D) will indicate charging status.
Green LED (Constant on)
Green LED (Flashing)
Red LED (Flashing)
3. Operation
3a. Main light - Cool white ( L1 )
Short press (A) to cycle through
light modes
When (L1) is on, long press (A)
for 2 seconds
When distance sensor mode is
activated
When distance sensor mode is
activated, short press (A)
3b. Other operations
When (L1) is off, long press (A)
for >5 seconds
When lock mode activated, long
press (A) for >5 seconds
Note: When the battery is running low, sensor function will be turned off
automatically to extend battery life. (L1 ashing 3 times)
4. Specifications
Lumen 300 lm – 5 lm
Candela Max. 6200 cd
Beam distance Max. 157 m
Runtime 3 h – 42 h (NiMH) /
5 h – 69 h (Alkaline)
IP rating IPX6
(D) Power / charging indicator light
(red / green light)
(E) Micro USB charging port
(L1) Main light
- Good
- Average
- Low
- Charging completed
- Charging in progress
- Charging stopped. Ensure NiMH
rechargeable batteries are installed
properly.
Main light on
High --> Medium --> Low --> Flashing
--> Off
Distance sensor activated and (C) is on
(L1 ashes once)
Main light on
(Light output will be adjusted automatically
according to view distance)
Distance sensor deactivated and (C) is
off
Lock mode activated (L1 ashes twice).
In lock mode, (L1) ashes momentarily
when (A) is pressed.
Lock mode deactivated
(L1 ashes twice)
Impact resistance 1.0 m
Battery
LED
Weight
Dimensions
GB
NiMH / Alkaline (3 x AAA)
Cree
110g (with batteries)
46 x 56 x 34 mm