System; Initial Settings - Samsung BD-D5100 Manual Del Usuario

NOTE
✎
▪ Be sure to select the correct Digital Output or
you will hear no sound or just loud noise.
▪ If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
digital, DTS), the audio signal outputs as PCM.
▪ Regular DVDs do not have BONUSVIEW audio
and Navigation Sound Effects.
▪ Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
▪ This Digital Output setup does not effect the
analog (L/R) audio or HDMI audio output to your
TV. It effects the coaxial and HDMI audio output
when your player is connected to an AV receiver.
▪ If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
PCM Downsampling
Lets you set 48kHz and 96kHz PCM down-
sampling on or off.
• Off : Select when the AV receiver
connected to the player is 96kHz
compatible.
• On : Select when the AV receiver
connected to the player is not 96kHz
compatible. 96kHz signals will be down
converted to 48kHz.
NOTE
✎
▪ Even when PCM Downsampling is set to Off,
some discs will only output downsampled audio
through the coaxial digital outputs.
HDMI
• If your TV is not compatible with
compressed multi-channel formats (Dolby
Digital, DTS), the player may output PCM
2ch downmixed audio even though you
selected Bitstream (either Re-encoded or
Unprocessed) in the setup menu.
• If your TV is not compatible with PCM
sampling rates over 48kHz, the player may
output 48kHz downsampled PCM audio
even though you set PCM Downsampling
to Off.
Dynamic Range Control
You can listen at low volumes, but still hear
dialog clearly.
This is only active if your player detects a
Dolby Digital signal.
• Auto : The Dynamic Range Control will be
set automatically based on the information
provided by the Dolby TrueHD Soundtrack.
• Off : You can enjoy the movie with the
standard Dynamic Range.
• On : When Movie soundtracks are played
at low volume or through smaller speakers,
the system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
Downmixing Mode
Lets you select how the player will downmix
multi-channel audio into fewer channels.
• Normal Stereo : Downmixes the multi-
channel audio into two channel stereo.
Choose when connected to equipment that
does not support virtual surround functions
such as Dolby Pro Logic.
• Surround Compatible : Downmixes multi-
channel audio into surround compatible
stereo. Choose when connected to
equipment that supports virtual surround
functions such as Dolby Pro Logic.

System

Initial Settings

By using the Initial Settings function, you can
set the language, Network Settings, etc.
For more information about the Initial Settings
function, refer to the Initial Settings section of
this user manual (page 12).
Anynet+(HDMI-CEC)
Anynet+ is a convenient function that offers linked
operations with other Samsung players that have
the Anynet+ feature.
To operate this function, connect this player to an
Anynet+ Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY (
button on the TV's remote control.
For more information, please see the TV user
manual.
• Off : Anynet+ functions will not work.
• On : Anynet+ functions will work.
NOTE
✎
▪ This function is not available if the HDMI cable
does not support CEC.
▪ If your Samsung TV has an Anynet+ logo,
then it supports the Anynet+ function.
▪ Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
BD Data Management
Enables you to manage the downloaded
contents you accessed through a Blu-ray disc
that supports the BD-LIVE service and stored
on a flash drive.
You can check the device's information
including the storage size, delete the BD
data, or change the Flash memory device
BD Data Management Screen Information :
• Total Size : Total memory size of the
device.
• Available Size : Available memory in the
device.
NOTE
✎
▪ In the external memory mode, disc playback
may be stopped if you disconnect the USB
device in the middle of playback.
▪ Only those USB devices formatted in FAT file
)
format (DOS 8.3 volume label) are supported.
We recommend you use USB devices that
support USB 2.0 protocol with 4 MB/sec or
faster read/write speed.
▪ The Resume Play function may not work after
you format the storage device.
▪ The total memory available to BD Data
Management may differ, depending on the
conditions.
Clock
Set time-related functions.
• Clock Mode : You can set it to Auto or
Manual.
If you select Manual, the Clock Set
menu will be activated while DST will be
deactivated.
• Clock Set : You can specify the current
time and date manually.
.
15