Connecting To An Audio System (2 Channel Amplifi Er); Connecting To An Audio System (Dolby Digital, Dts Amplifi Er) - Samsung BD-P1500 Manual Del Usuario

connections
CONNECTING TO AN AUDIO SYSTEM
(DOLBY DIGITAL, DTS AMPLIFIER)
1. Using the optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the
Blu-ray Disc Player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifi er.
2. Using the video signal cable(s), connect the HDMI , COMPONENT or VIDEO OUT terminals on the rear of the
Blu-ray Disc Player to the HDMI, COMPONENT or VIDEO IN terminals of your TV as described on pages 20 to
24.
3. Turn on the Blu-ray Disc Player, TV, and Amplifi er.
4. Press the input select button of the Amplifi er to select the external input in order to hear sound from
the Blu-ray Disc Player. Refer to your Amplifi er's user manual to set the Amplifi er's audio input.
COMPONENT OUT
DIGITAL
AUDIO OUT
B
HDMI OUT
LAN
USB HOST
2
OPTICAL
AV OUT
M

Please turn the volume down when you turn on the Amplifi er. Sudden loud sound may cause damage to the
speakers and your ears.

Please set the audio in the menu screen according to the Amplifi er. (See pages 35~36)

The position of terminals may vary depending on the Amplifi er. Please refer to the user's manual of your Amplifi er.

When using this connection, discs with LPCM audio soundtracks will only be heard over the front two
channels.
26_ connections
DIGITAL
AUDIO OUT
HDMI OUT HDMI OUT
LAN LAN
USB HOST USB HOST
OPTICAL
COMPONENT OUT COMPONENT OUT
AV OUT AV OUT