Camera Controls - LEAF AFi Guia De Inicio Rapido

26

Camera Controls

Turning Your Camera System On and Off
Selecting the Shutter Release Mode
Before you turn on your digital camera system, make sure that you have
inserted a charged battery.
Turn the
1. On/Off
Figure 18: On/Off Dial
Briefly push the shutter release button.
2.
The display on the AFi camera body and back turn on, and the camera
system is ready for use.
Note: The camera system will enter sleep mode if it is not used for three
minutes. You can set the sleep mode in the camera menu.
To turn the camera off:
Turn the shutter release dial to
Using the On/Off dial (Figure 18), select the desired shutter release
mode:
Single shot: takes a single shot when you push the shutter release
button
Continuous: the camera shoots continually until you release the
shutter release button
dial to single shot or continuous mode.
.
OFF
Chapter 2 – Getting Started