LEAF AFi Guia De Inicio Rapido página 97

Camera Controls
Selecting the Meter Mode
Figure 21: Meter Mode Controls
Move the Meter Mode switch to select the desired meter mode:
1.
•
: The exposure for the image is calculated using an average
Average
meter reading.
•
Center-weighted light metering
calculated with 75% metering from the central area, and 25%
metering the remaining area.
•
Spot metering
metering of a spot approximately represented by the circle in the
viewfinder.
•
Red dot—use to change the ISO setting for film: Press the Meter
Mode button, and rotate the front dial to the desired ISO.
Note: To change the ISO for digital shooting, use the controls on the AFi
back. For more information, see Setting the ISO on page 38.
Push the shutter release button until you reach the half-way position
2.
and encounter light resistance.
The camera system measures the light and stores the reading as long as
the shutter release button is kept in the half-way position. At the same
time, the auto-focus is also locked.
: The exposure for the image is
: The exposure for the image is calculated on the
Average
Center Weight
Spot Metering
red dot
33