General Instructions - Zagg Now Cam Instrucciones

3. Your computer will recognize the Now Cam as a new drive. Copy and
paste files to your preferred location, or simply drag and drop them.
4. When your files have transferred, the LED will flash red every two seconds
indicating that your Now Cam is charging.
5. Remove the included cable when you're ready, and keep on adventuring.

GENERAL INSTRUCTIONS

Charging
Your Now Cam is ready to deliver hours of music, pictures, and video*. It will
alert you when the battery reaches 20% capacity. Recharging it is quick and easy.
Here's how:
1. The LED next to the mounting magnet will flash red every seven seconds
once your Now Cam's rechargeable battery reaches 20% capacity remaining.
2. Lift the cover located between the camera dial and power button to
expose the micro USB port.
3. Connect the included micro USB cable to the port.
4. Connect the USB end of the cable to your preferred USB outlet. The LED
will light red while charging.
5. When the LED turns off, your Now Cam is fully charged. Remove the
charging cable and continue your adventures.
*Hours of use varies according to music play time and recording time. Recording requires more
power and will use your Now Cam's battery faster.
INSTALLING AND USING THE LANYARDS
Your Now Cam includes three convenient lanyards that help ensure it stays with
you during your adventures. Installing the lanyards is a cinch – here's how:
1. Feed the thin end of a lanyard through the hole in your Now Cam that
is just above the mounting magnet. Pull until the detachable clip on the
lanyard touches the hole.
2. Wrap the lanyard up and over the hole and place it through the thin end
you just fed through the hole.
3. Pull the lanyard completely through the thin end until the thin end
tightens upon itself.
4. Pass your hand through the lanyard for extra security during your activities.
7