Descargar Imprimir esta página

Elite 070056 Manual De Utilización página 4

Publicidad

MANUAL OF USER
GB
Réf:
070056: HAND WINCH 2T
Caution! Read the note of use before using this product
WARNING
1/Read and follow attentively the instructions before using the winch. 2/ Take guard to preserve the tended cable when
you tighten it or loosen it. 3/ be sure that the weight to be charged is not higher than the capacity of the winch. 4/ Moor
the winch well before use. Ensure well of the adequacy and solidity of the accessories used (sling, hooks, strap...). 5/ Do
not use the winch in the presence of children, people old or of any other spectator who could be wounded by an accidental
rupture. 6/ Do not surround the cable around the load and never hang it on itself. Always use the winch on line: do not
draw from load to the turning of a corner. 7/ do not use the winch if the cable is frayed, twisted or damaged. 8/ Do not use
a extension on the handle of the winch to increase the lever effect. You would be likely to damage the winch.
INSTRUCTIONS OF ASSEMBLY:
( F1) Hang the pulley at a point of solid fixing. Lower the handle as indicated on the diagram and disengage the toothed
rack by slipping the spring of latch (A) along the notch. Bring back the handle to opposite (without slackening the latch)
and maintain this position firmly. Press on the latch of stop (B) in direction of the arrow (B) and draw the winch to pay
out the cable as desired
CAREFUL! YOU HAVE ALWAYS TO CHECK THE TENTION OF THE CABLE, IN ORDER TO AVOID
ANY DAMAGE WITH THE WINCH.
(F2) Once the hung load engage the toothed rack by letting the latch (A) fall down on the toothed wheel. Each action on
the handle will ensure the increase of the load
TO AVOID THE ABRUPT MOVEMENTS ON THE HANDLE, A FIRM HAND PRESSURE IS EFFECTIVE.
DANGER: DO NOT TO OVERLOAD
(F3) Slacken the tension:
Make slip the spring of the latch of toothed rack along the notch into the direction of the arrow (A). Press firmly on the
handle to disengage the latch (B) (you cannot see it on this diagram). This action will slacken the loading of a notch.
Repeat this action several times, according to the desired relaxation.
COGEX OUTILLAGE – AVENUE DE PARIS – 32500 FLEURANCE - FRANCE
070056
4/7

Publicidad

loading