Mophie charge force powerstation Manual Del Usuario página 7

Make sure that your device is aligned on the
charge force powerstation battery as shown above.
(mophie cases with charge force wireless power will
automatically align for a proper charge.)
2. Press the status button for 2 seconds to begin
charging. The charging LED (shown in the
illustration below) will illuminate to indicate
that the device is properly charging.
IMPORTANT: If the charging LED flashes on and off,
it means that the wireless device is not charging
properly. Make sure the device is properly aligned
on the charge force powerstation battery as shown
in the illustration for Step 1.
7