Technical Specifications - Velleman VelLight LEDA308 Manual Del Usuario

LEDA308/309/310/311/311B/312/312B/313B
The housing, the visible parts, the mounting supports and the installation
location (e.g. ceiling, suspension, trussing) should not be deformed,
modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections...
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.
If the protective glass [2] is damaged, disconnect the lamp immediately
from the mains. Have it repaired immediately by a qualified technician.
Do not use the lamp with a cracked or broken protective glass.
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol
or solvents.
There are no user-serviceable parts.
Contact your dealer for spare parts if necessary.

8. Technical Specifications

housing colour
power supply
max. power
LED
colour
temperature
beam angle
luminous flux
light efficiency
dimensions
weight
housing colour
power supply
max. power
LED
colour temperature
beam angle
luminous flux
light efficiency
dimensions
weight
V. 01 – 07/01/2014
LEDA308
10 W
10 W 105LM/W Epistar chip
680 lm
grey
85–265 VAC / 50–60 Hz
20 W 105LM/W Epistar chip
6500 K
90°
58 lm/W
185 x 165 x 55 mm
1.15 kg
LEDA310
grey
85–265 VAC / 50–60 Hz
30 W
30 W 105LM/W Epistar chip
6500 K
90°
2043 lm
61 lm/W
290 x 250 x 80 mm
2.85 kg
7
LEDA309
20 W
1355 lm
©Velleman nv