VOLTOMAT HEATING BH-117327.3 Manual De Instrucciones página 97

PARTS DESCRIPTION
1. Power switch
2. Display
3. Function selector
4. Timer
5. Air outlet
6. Remote control
REMOTE CONTROL
a) On/off button
b) Timer button
c) Set button
d) Function selector
e) Confirm button
f) Open window detector setting
g) Buttons for weekly program setting
Note: One piece of CR2025 battery is provided in the remote control. Before use, please pull out the plastic
insulation sheet. When the battary has run out of power, change it according to the instruction behind the
remote control. If the remote control is not in use for a long time, please take the battery out.
OPERATION
Make sure the power switch is in position "O". Plug the appliance into an appropriate electrical outlet. Set the
power switch to position "I". The display will show "S". The appliance is now in standby mode. Press button
" " in the display or button "
1. Button " " in the display:
1) Press the button "
" in the remote control to choose your desired working power.
" once, the ventilator will be switched on. (A)
- 96 -