Smoothskin Bare Fit Guia Del Usuario página 22

c) Press the ACTIVATION BUTTON. The device will flash, and a warm sensation should be felt.
d) Move the Handset to the next area to be treated and repeat. The device needs to recharge between flashes. This will only
take about 0.6 seconds.
e) Ensure that the ENTIRE AREA receives treatment, and treat any stubborn areas (such as underarms) with multiple passes
(running your device over the same area a maximum of 3 times).
WARNING:
Make sure not to cover the vents on the device whilst treating, as this can lead to the device overheating.
SmoothSkin Bare Fit is an extremely fast and powerful device, allowing you to complete a whole body treatment in under 10
minutes.
TREATMENT METHOD – STAMP OR GLIDE?
Stamp Method
This method is recommended for small areas such as the underarm and bikini line. Place the Handset on the skin,
press & release the Activation Button. Remove from the skin before carefully re-applying to the next treatment area.
Glide method
This method is recommended for larger areas such as legs. Place the Handset on the skin, hold down the Activation
Button (press down continuously), then glide the Handset along the skin between flashes. Try to move the Handset
at a steady speed that gives full coverage without overlap or missed areas.
22
Treatment
Window
Full Coverage Overlapping Missed Areas