Hardware Overview; Status Indicators; Battery Status - Kicker Bullfrog BF100 Manual Del Propietário

Status Indicators

The KICKER Bullfrog uses light indicators to acknowledge changes in settings, modes,
and input response. If no action can be taken, such as decreasing volume when at minimum,
or pressing FWD/BACK while in AUX mode, there will be no response.

Battery Status:

Battery status is indicated with 5 white LEDs above the PAIR button. These LEDs will also
indicate Double-Kick mode (see
while the Bullfrog is powered on. Status display will end after 5 seconds. Remember to charge
the Bullfrog for 6 hours before fi rst use. Charging is complete when Battery LEDs stop counting
and turn off.
BATTERY STATUS LEDs (1-5)
Off
All Solid
4 Solid
3 Solid
2 Solid
1 Solid
1 Blinking
Counting Up
Input Status:
Audio input status is indicated with one of two colored LEDs, located above the PAIR button.
These LEDs will change color with the source:
Bluetooth - Blue
LED status indicators:
• illuminated when the Bullfrog is powered on
• solid when input source is set
• fl ashes blue when in Bluetooth pairing mode
• blinks when receiving commands
• breathes slowly when audio is paused or muted
3
Pages
Full Charge
>80%
60%–80%
40%–60%
20%-40%
<20%
<10%
Battery Charging
Auxiliary Input - Green
}
6–7). To show current battery status, press any button
AUX