The discreet solution to a fly free home
Please read these instructions carefully and store in a
safe place for future reference.
PRISM
®
As part of the Insect-O-Cutor
products, PRISM
is an easy to service and highly
®
effective insect control unit for use within your kitchen,
conservatory or lounge area. PRISM
effective UV tube and is designed for use with a high
specification Glupac
glueboard. The patented
®
glueboard technology ensures the user doesn't come
into contact with caught flies.
Contents of package
1 x PRISM
flykiller
®
1 x Glupac
glueboard
®
1 x Compact 11W tube (fitted)
Warning
PRISM
is not to be used by children or persons with
®
reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been
given supervision or instruction.
Children should be supervised to ensure they do not play
with the appliance.
If the mains cable is damaged it must be replaced by
the manufacturer, its service client or similarly a qualified
person to avoid hazard.
Not suitable for applications where potentially explosive
environments may exist.
Positioning and guidance for use
THIS UNIT IS FOR INDOOR USE ONLY. NOT SUITABLE FOR USE
IN BARNS, STABLES & SIMILAR LOCATIONS.
PRISM
SHOULD BE KEPT OUT OF REACH OF CHILDREN.
®
PRISM
should ideally be positioned in the darkest place
®
within the area to be protected. The unit will work best if
it is placed away from windows, skylights or other sources
of light, or where it may be obscured by furniture, doors
or other obstacles. Ideally, PRISM
every part of the area to be protected.
PRISM
should preferably be in operation for 24 hours a
®
day to ensure that the area is kept free of flying insects.
Insects are most attracted to PRISM
is no competition from daylight or other light sources.
Guarantee
PRISM
has a 2 year guarantee and if maintained as
®
recommended in these instructions should continue to
work for many years. This guarantee excludes the tube
and the glueboard and it does not cover breakdown
due to misuse, incorrect operation or use in an incorrect
application. Any use of non-approved consumables may
invalidate the guarantee. Ensure that a genuine Glupac
glueboard and an Insect-O-Cutor
used in conjunction with this product.
Note – For first time use, the special insect attracting tube will
reach its full UV output after approximately 6 hours of use.
brand of insect control
®
uses a highly
®
should be visible from
®
at night when there
®
or Philips UV tube are
®
Installation
Once PRISM
is correctly positioned on a horizontal surface,
®
the glueboard must then be fitted. In order to do this
correctly, remove the glueboard from the back of the unit,
remove the brown Glupac
put the glueboard back into the unit as described in the
glueboard replacement section of this document. PRISM
has a plug fitted to the mains lead and once installed in
position, should be plugged into the nearest mains outlet.
Cleaning
It is recommended that cleaning is carried out when the
glueboard is replaced. Ensure that the unit has been
disconnected from the power supply before cleaning.
Once the glueboard is removed, the unit should be
thoroughly wiped down with a damp cloth, removing any
build-up of dirt. Ensure the unit is completely dry before
reconnecting it to the power supply.
Glueboard replacement
The glueboard should be replaced every month with a
genuine Glupac
glueboard. Use of non-approved
®
glueboards may invalidate your guarantee.
To replace the glueboard:
1. Ensure the unit is disconnected from the power supply.
2. Position PRISM
so the back is facing you.
®
3. Using one hand to support the unit, use your thumb and
forefinger of your other hand to gently pull the used
glueboard out through the slot in the back of the unit.
4. Once free from the unit, dispose of the used glueboard
hygienically.
5. Remove the brown release paper from the new Glupac
glueboard to reveal the glue.
6. Slowly slide the new glueboard into position along the
two runners with the glue side facing the tube.
Always ensure that the glueboards used are genuine
Glupac
glueboards.
®
Fitting
®
Removal
paper to reveal the glue, then
®
®
®