Energy Saving; Service Functions - Sabiana UP-TOUCH Instrucciones De Uso

English

ENERGY SAVING

°
The energy saving function is activated / deactivated
via the "Energ" function in the operation mode menu.
• Press the "M" button; the operation mode flashes;
• Use the " - " button until the "Energ" function is
selected on the display.
• Use the ON/OFF " " button to activate (ON) or
deactivate (OFF) the function.
• Press the "M" button to confirm.

SERVICE FUNCTIONS

> 3 sec.
With this menu you can check some of the control
parameters (probes value, possible alarms).
Press the "+" and "-" buttons simultaneously for
3 seconds with the control in "OFF".
Select the desired parameter by pressing the "+" or "-"
buttons and confirm with the "M" button.
Once the parameter has been selected, the display
will show the value.
To exit the menu press the "M" button for more than
5 sec.
FUNC-
DESCRIPTION and STATUSES
TION
T1 air probe value display
P1
diS = probe disconnected
T2 probe value display
P2
diS = probe disconnected
T3 probe value display
P3
diS = probe disconnected
Display of any alarms present
--- = No alarm
AL1 = Faulty T1 probe
AL2 = Faulty T2 probe
ALL
AL3 = Faulty T3 probe
AL4 = Wrong Master dip switch
configuration
AL6 = Faulty RS485 transmission
(Master/Slave)
AL7 = Faulty TTL transmission (T-MB/
Slave)
Displaying the voltage value sent to
Usc1
the inverter by the master
44