TechniSat HDTV 46 Guia De Inicio Rapido página 17

6.3 AV source
> In order to select a device connected to the Scart sockets, component input, to the HDMI inputs,
to the VGA connection or to the AV connection of the TV set, press the AV key.
> Select the required source (TV, Radio, EuroAV 1/2, HDMI 1/2/3, VGA,
Video / S-Video oder YUV) with the Arrow keys up/down.
> Acknowledge with OK to switch to the selected input.
6.4 Programme/Source information
6.4.1 Infobox
An info box always appears on the screen after changing the programme.
This info box displays the programme position and the programme name of the set programme,
the title of the current broadcast, the currently active programme list, and the current time
as well as further programme features (e.g.
and for Dolby Digital broadcasts).
A progress bar (yellow) is additionally displayed, which indicates the past broadcasting time of
the current programme. The running programme has lasted longer than indicated, if the end is red.
6.4.2 Displaying time and programme information/further programme information
Use this function to view information on the program you are watching.
> Press the Info key, to display information on the set programme.
> As far as the programme is being broadcast, you can call further programme information
concerning the viewed programme by pressing the Info key again.
> The following programme is displayed, if broadcast, by pressing the Info key again.
> Press the Info again to remove the display.
Source selection / Programme/Source information
for video text, for 16:9 programmes
17