Function Selection - TechniSat HDTV 46 Guia De Inicio Rapido

Function selection / PVR recording

6.15 Function selection

> Pressing the blue control key opens the navigation menu (NAV menu).
> Use the Arrow keys up/down to mark the function (TV, radio, PVR, music or pictures),
which you would like to call.
> Press OK to select the marked function.
7 Hard disk operation
You do not require any external storage medium for recording (e.g. Video or DVD recorder)
anymore due to the integrated hard disk drive and the PVR function (PVR = Personal Video Recorder).
The recording capacity depends thereby on the data volume of the broadcast material and on the size
of the hard disk. A change of the hard disk not authorised by TechniSat is considered as non-intended
and leads to loss of the warranty.
It is possible to record programmes from the sources DVB-S, DVB-C, DVB-T and analogue CT as well as
from the external sources EuroAV 1, EuroAV 2 and Video/S-Video on the hard disk. Provided that
they are being broadcast, extra audio channels, video text data and sub-titles will also be recorded
in addition to the actual audio and video data. You can call these during the following playback.
7.1 Recording
The following recording modes are available for recording programmes on the hard disk.
1. Immediate recording
Select this recording mode to record the current broadcast immediately at the push of a button.
2. Timer-controlled recording
This function will switch your TV set on and off for the selected broadcast,
in order to record it on your hard disk, for example during your absence.
The timer can be programmed automatically or manually using the "SFI+" function.
3. TIMESHIFT Recording
TIMESHIFT recording makes time delayed TV possible.
You can watch another programme whilst recording and play it back later on.
22