Pneumatic Installation - PIAB P3010 CU Manual

CU
INSTALLATION
CU can be installed in any orientation. Ensure that the exhaust from the ejector is not
blocked. When connecting supply air and vacuum hoses to the unit, it is important
to choose proper pipe dimensions to prevent pressure drops. Avoid restrictive inner
diameters, long piping distances, sharp bends and small-sized connections.

PNEUMATIC INSTALLATION

P3010 CU
1 Compressed air
2 Vacuum
3 Exhaust
For more detailed information see dimensional drawing.
16
G1/8", Ø6mm
Ø10mm, 1/4" NPSF
Ø8mm