Treble: Treble adjustment on the main channel
Bass: Bass adjustment on the main channel
USB/SD/MMC CARD: Inputs for USB sticks and SD or MMC cards.
MIC INPUT : Input sockets for the microphones
MIC1/2-VOL : Volume control of the microphones
TREBLE : Treble adjustment
BASS : Bass adjustment
Operation
1. Press the POWER switch to switch on the amplifier.
2. Turn the volume control on the front panel until you reach the desired volume.
3. Input source selection: Press the INPUT button to select the input audio signal.
4. Tone and balance control of the main channel.
•
Rotate the BASS knob to set the low frequencies of the main channel.
•
Rotate the TREBLE knob to set the low frequencies of the main channel.
•
Microphone volume setting
Rotate the knob MIC1/MIC2 VOL to set the volume of the microphone.
IN USB/SD/MMC MODE
•
Press the PREV button to skip back to the beginning of the track. Press again to skip
to the beginning of the previous track.
•
Press NEXT to skip to the beginning of the following track.
•
Press PLAY/PAUSE to start or pause playback.
Connectors on the rear panel
AUDIO INPUT
5
A
Input for a CD/VCD/DVD player
B
Input for a tuner/cassette player
L
Left main channel speaker out
R Right main channel speaker out