Sanyo TRC-540M Manual De Instrucciones página 8

Automatic stop system
When the end of the tape is reached during recording or
playing back, the tape stops automatically and the buttons
are released. This system does not work in fast forward or
rewind operation. Be sure to press STOP/EJECT button when
the end of the tape has been reached.
Example (When using MC-60 tape):
Press the STOP/EJECT button after approximately 2 min-
utes have elapsed under fast forward or rewind operation.
Fast forwarding or rewinding
In the stop mode, slide and lock the FFW/CUE | REW/REV
switch: down for fast forward, up for rewind.
Press the STOP/EJECT button when the desired point or
end of the tape is reached.
Temporarily stopping operation
Slide the PAUSE switch up in recording or playing back. Slide
it down to resume operation.
7
TRC-540M/US 8 9/10/03, 10:37 AM